PPS Compound: 40% fiberglass reinforced material, natural color

  Properties ASTM
Test Method
Units Typical Values
Mechanical Tensile Strength D-638 psi 6,200
Tensile Elongation D-638 % @ Break 1.1
Tensile Modulus D-638 psi 900,000
Flexural Strength D-790 psi 11,000
Flexural Modulus D-790 psi 1,200,000
Flexural Strain D-790 % 1..4
Compressive Strength D-695 psi 25,000
Compressive Modulus D-695 psi 580,000
Izod Impact Strength (Notched) D-256 ft-lb/in 0.7
Shear Strength D-732 psi 8,100
Hardness D-2240 Shore D 88
Hardness D-785 Rockwell (M) -
Thermal Heat Distortion Temperature D-648 °F 234
CLTE (40°F TO 300°F) E-831 10-6/°F -
Thermal Conductivity C-177 BTU in/hr-ft2-°F -
Continuous Use (Mechanical) UL746B ° -
Limiting Oxygen Index D2863 %O2 -
Melt Point DSC °F -
Electrical Dielectric Strength D-149 KVcm 233
Dielectric Constant D-150 50Hz, 200°C 4.6
Volume Resistivity D-257 ohm-cm 2.9
Surface Resistivity D-257 ohm/sq -
Physical Specific Gravity D-792 gm/cm3 1.70
Color - - Natural
Filler Content - % 40
Water Absorption (RT 24h) D-570 % 0.063
Typical Level of Crystallinity - % -
Other Static Coefficient of Friction D-1894 - -
Kinetic Coefficient of Friction D-1894 - -

Note: Listed properties should be interpreted as typical rather than minimum values. This technical information is presented in good faith and is based upon what is believed to be reliable laboratory data. We cannot guarantee the accuracy or completeness of this information. The responsibility for determining product suitability for any given application lies with the customer.