TECAPEEK® CM XP98 MT BLACK

PEEK Compound: 30% carbon fiber reinforced. Material acceptable for use in medical devices. Not suitable for use within the body.

  Properties ASTM
Test Method		 Units Typical Values
Mechanical Tensile Strength D-638 psi 19,000
Tensile Elongation D-638 % @ Break 2.5
Tensile Elongation D-638 % @ Yield 2.3
Tensile Modulus D-790 psi 1,840,000
Flexural Strength D-790 psi 32,500
Flexural Modulus D-790 psi 1,600,000
Compressive Strength
(10%)		 D-695 psi 32,000
Compressive Strength
(1%)		 D-695 psi 7,700
Compressive Modulus D-695 psi 770,000
Izod Impact Strength (Notched) D-256 ft-lb/in 1.00
Shear Strength D-732 psi 13,000
Hardness D-2240 Shore D 93
Hardness D-785 Rockwell (M) 102
Thermal Heat Distortion Temperature D-648 °F >459
Coefficient of Linear
Thermal Expansion		 E-831 10-6/°F -
Thermal Conductivity C-177 BTU in/hr-ft2-°F -
Continuous Use (Mechanical) UL746B ° -
Limiting Oxygen Index D-2863 %O2 -
Melt Point DSC °F 649
Electrical Dielectric Strength D-149 KVcm -
Dielectric Constant D-150 50Hz, 200°C -
Volume Resistivity D-257 ohm-cm -
Surface Resistivity D-257 ohm/sq -
Physical Specific Gravity D-792 gm/cm3 -
Color - - Black
Filler Content - % 30
Water Absorption (RT 24h) D-570 % 0.05
Typical Level of Crystallinity - % -
Other Cytotoxicity: ISO Elution Method 1XMEM Extract - Passed

Note: Listed properties should be interpreted as typical rather than minimum values. This technical information is presented in good faith and is based upon what is believed to be reliable laboratory data. We cannot guarantee the accuracy or completeness of this information. The responsibility for determining product suitability for any given application lies with the customer.