TECASINT® CM XP135 BLACK

PI Compound: 15% graphite 5% PTFE

  Properties ASTM
Test Method
Units Typical Values
Mechanical Tensile Strength D-1708 psi 13,000
Tensile Elongation D-1708 % @ Break 3.5
Tensile Modulus D-1708 psi -
Flexural Strength D-790 psi 19,000
Flexural Modulus D-790 psi 450,00
Flexural Strain D-790 % -
Compressive Strength (10% strain) D-695 psi 28,000
Compressive Modulus D-695 psi -
Izod Impact Strength (notched) D-256 ft-lb/in 0.47
Shear Strength D-732 psi -
Hardness D-2240 Shore D -
Hardness D-785 Rockwell (M) 110
Thermal Heat Distortion Temperature D-648 °F -
Coefficient of Linear
Thermal Expansion
D-696 10-6/°F 23.3
Thermal Conductivity C-177 BTU in/hr-ft2-°F -
Continuous Use (Mechanical) UL746B °F -
Limiting oxygen Index D2863 %O2 -
Melt Point DSC °F -
Electrical Dielectric Strength D-149 KVcm -
Dielectric Constant D-150 50Hz, 200°C -
Volume Resistivity D-257 ohm-cm -
Surface Resistivity D-257 ohm/sq -
Physical Specific Gravity D-792 gm/cm3 1.48
Color - - Black
Filler Content - % 20
Water Absorption (RT 24h) D-570 % 0.5
Typical Level of Crystallinity - % -
Other Static Coefficient of Friction D-1894 - -
Kinetic Coefficient of Friction D-1894 - -

Note: Listed properties should be interpreted as typical rather than minimum values. This technical information is presented in good faith and is based upon what is believed to be reliable laboratory data. We cannot guarantee the accuracy or completeness of this information. The responsibility for determining product suitability for any given application lies with the customer.